Anti-rust Oil For Mold Dewatering Daruisi

|Function|

This product is mainly used for the protection of molds after cleaning, it can directly remove the sweat marks and moisture on the molds, with a long anti-rust period, and it also has good protection for the molds stored in stack.

|Description|

• Reliable protection: The protective oil film formed will not harden, crack onpeel.

• Convenience and energy saving: Without heating, it can replace traditional processes such as drying, wax sealing and oiling.

• Safe and harmless: No harm to metal and human skin.

|Use|

• Dip coating, brush coating, spraying and other methods can be used to make Daruisi completely cover the surface of the mold.

• For the mold with more water attached, it can be directly immersed in Daruisi until the mold surface is evenly attached to a layer of oil film, and no water droplets bubbles shall prevail.

• The oil tank in which Daruisi is immersed shall be designed to be the taper shape and equipped with a cut-off valve at the bottom to regularly remove water from the bottom of the tank to keep the purity of Daruisi.

|Matters Need Attention|

• Use and storage: it shall avoid high temperature and keep it away from fire sources.

• The use of the environment shall be kept well ventilated.

• Rubber and plastics that are not resistant to solvents shall not be exposed to this product for a long time.

|Packing|

It shall be packed in 20L, 200L iron buckets

500ml aerosol tank

|Storage stability|

In original closed containers under cool and dry conditions 24 months from date of production.

|Special declaration|

Our technical information is given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. It does not release you from the obligation to test the products supplied by us as to their suitability for the intended processes and uses.