Inside Tire Paint Agent Insturt SN3700

|Function|

Tire inside paint.

|Technical Data|

Composition: White emulsion of reactive silicone polymers

Appearance: white liquid

PH: 7.0~9.0

Dry content: 8.0~10.0%

|Description|

Inside tire paint agent Insturt SN3700 is inside tire demolding agent without fillers. lt contains reactive silicone polymer. The product gives a very good slip of the bladder into the green tire and a very good release effect after the cure. Futhermore it shows very good air bleed. The inside of the tire is clean and smooth after the cure. The inner liner splice is not effected because the active ingredient does not show the negative effects normally observed with regular silicone oil.

|Use|

Inside tire paint agent SN3700 sprayed onto the inside of the green tire using atomizing or airless spray systems. The product has virtually no tendency towards sedimentation. However, gentle stirring is recommended.

|Packing|

50kg /Plastic drum

|Storage stability|

Recommended storage temperature: 2-45 "C

In original closed containers under cool and dry conditions 6 months from date of production. Avoid freezing.

|Safety and Transport|

Insturt SN3700 is not classified as dangerous for transport according to transport regulations. Proper use of this product will not cause any harm.

|Special declaration|

Our technical information is given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. it does not release you from the obligation to test the products supplied by us as to their suitability for the intended processes and uses.