Tire Finishing Paint Tiflue FT3608

|Function|

Solvent-free, silicone-free ready-to-use outside tire paint for cosmetic repairs of cured tires

|Technical Data|

• Composition: mixture of acrylic and SBR latex with mineral filler and carbon black

• Appearance: black liquid

• Density, 25 °C: 1.05 g/cm³

|Description|

Tiflue FT3608 can be used to repair and cover up the flow marks and stains formed on the surface of the tyre during curing. The surface of the tyre is complete and uniform after repair. This product can also be used for retreads to help the sidewall blend with the new tread and give the tyre a consistent appearance. Tiflue FT3608 is a water-based, highly durable tyre repair fluid that does not contain any inflammable solvents. lt is odorless, and poses no risk of fire. The product has good adhesion and can resist external forces during tyre transport friction and can prevent damage to the painted surface during long-term storage. The product can be dried quickly at room temperature.

|Use|

Ideally the outside tire finishing paint FT3608 is applied with air-atomizing guns or a soft brush evenly onto the surface of clean tire. it is recommended that the product be lightly stirred before use or roll/shake the drum slightly after placing it flat (make sure the lid is sealed).

|Dosage|

The ideal amount depends on the different application operating equipment, tire size and production process of each plant. Please contact our engineers for more information.

|Packing|

50 kg/plastic drums

|Storage stability|

Recommended storage temperature: 2-45°C

In original closed containers under cool and dry conditions 6 months from date of production. Avoid freezing.

|Safety and Transport|

Tiflue FT3608 is not classified as dangerous for transport according to transport regulations. Proper use of this product will not cause any harm.

|Special declaration|

Our technical information is given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. it does not release you from the obligation to test the products supplied by us as to their suitability for the intended processes and uses.