Inside Tire Paint Agent Insturt SN3800

|Function|

Tire inside paint used as a lubricant and exhaust during the tire curing process

|Technical Data|

• Aqueous suspension of inorganic pigments, polydimethylsiloxanes and additives

• Appearance: black liquid

• PH: approx 7.0

|Description|

• Insturt SN3800 can be directly applied on theinner wall of the green tire.The product is applieddirectly tothe inner side ofthe green tire and is ready to vulcanize after drying.

• The residue ofSN3800 is easily removed by the laser, and no air pollution.

|Use|

Insturt SN3800 is sprayed, preferably using air atomizing spray guns onto the inside of the green tire. The product shows onlyslight sedimentation.

Gentle stirring is recommended.

|Dosage|

The ideal amount depends on the size of the tire. Please contact our technical support.

|Packing|

50kg/Plastic drum

|Storage stability|

Recommended storage temperature: 2-45℃

In original closed containers under cool and dry conditions 12 months from date of production. Avoid freezing.

|Safety and Transport|

Insturt SN3800 is not classified as dangerous for transport according to transport regulations. Proper use of this product will not cause any harm.

|Special declaration|

Our technical information is given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. it does not release you from the obligation to test the products supplied by us as to their suitability for the intended processes and uses.