Paste Batch-off Release Agent Runlse PT3200

|Function|

Compound release agent to prevent the adherence of uncured rubber compounds, sheets, and profiles.

|Technical Data|

• Composition: organic fillers and surface active substances in an aqueous suspension.

• Appearance: white viscous liquid or paste

• PH: approx 10.0

• Solid content: approx20%

• Solubility: disperses in water

|Description|

• The aqueous solution of Runlse PT3200 forms a thin film on the surfaces of uncured rubber sheets and compounds which prevents the sticking together. PT3200 is quickly and easily dispersed in water. The good wetting of the rubber compounds to be separated ensures a favorable separating behavior whetherthe film is in a moist or dry condition. PT3200 is also suitable for light-colored and transparent qualities, since it causes no turbidity.

• The fillers in PT3200 dissolves easily in hot rubber compounds or during the curing process in rubber; consequently the vulcanizates show no traces of the release agent, especially suitable for light-colored and transparent products.

|Use|

Stir for at least 15minutes in water

|Dosage|

Recommended concentration 5-10%

|Packing|

20kg/plastic bag, 1000kg/box

|Storage stability|

In original closed containers under cool and dry conditions 12 months from date of production. Avoid freezing.

|Safety and Transport|

Runlse PT3200 is not classified as dangerous for transport according to transport regulations. Proper use of this product will not cause any harm.

|Special declaration|

Our technical information is given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. it does not release you from the obligation to test the products supplied by us as to their suitability for the intended processes and uses.