Powder Batch-off Release Agent Runlse PRB

|Function|

Compound release agent used to prevent the adhesion of uncured rubber and milled sheets after batch-off.

|Technical Data|

• Composition: combination of inorganic and organic fillers,surface active agent

• Appearance: grayish powder

• PH: approx. 10.0

• Ash: approx.60%(950°C)

• Solubility: disperses in water

|Description|

• The product forms a thin, flexible film on the surface of milled sheets.The film has good release properties and prevents the formation of dust. lt can effectively protect the working environment from dust during the subsequent processing.

• The product only forms slight, soft deposits on the equipment and these are easily removed. The product has anti-corrosive properties.

|Use|

The dispersion should be produced by vigorous stirring with water for at least 30 minutes. Warm water facilitates the dispersion process. The dispersion is largely stable and does not form sediment. Slight separation, which may occur, can be recuperated by gentle stirring. There is no troublesome foam formation.

|Dosage|

For standard compounds based on diene rubbers: 2.0-3.0 % dispersion in water.

For masticated NR or soft butyl compounds: 3.0-4.0 % dispersion in water.

|Packing|

25 kg/sack, 1000 kg/pallet

|Storage stability|

In original closed containers under cool and dry conditions 12 months from the date of production.

|Safety and Transport|

Runlse PRB is not classified as dangerous for transport according to transport regulations. Proper use of this product will not cause any harm.

|Special declaration|

Our technical information is given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. lt does not release you from the obligation to test the products supplied by us as to their suitability for the intended processes and uses.