Liquid Batch-off Release Agent Runlse PD3500

|Function|

Compound release agent to prevent the adherence of uncured rubber compounds, sheets, and profiles.

|Technical Data|

• Composition: combination of organic fillers and surface active agent

• Appearance: white viscous liquid

• PH: approx. 10.0

• Solid content:approx 22%

• Solubility: disperses in water

|Description|

• The aqueous solution of Runlse PD3500 forms a thin release film on the surface of rubber compounds. The film prevent the sticking of uncured rubber sheets.

• In continuous processing, sheets coated with PD3500 are more easily caught by the rolls. PD3500 creates little foam.

|Use|

It is recommended to pre-dilute Runlse PD3500 with water to achieve a homogeneous dispersion. Slight separation, which may occur, can be purged by gentle stirring. There is no troublesome foam formation.

|Dosage|

Recommended concentration 5-10%

|Packing|

50kg/plastic drums, 1000kg/IBC tank

|Storage stability|

In original closed containers under cool and dry conditions 12 months from date of production. Avoid freezing.

|Safety and Transport|

Runlse PD3500 is not classified as dangerous for transport according to transport regulations. Proper use of this product will not cause any harm.

|Special declaration|

Our technical information is given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. lt does not release you from the obligation to test the products supplied by us as to their suitability for the intended processes and uses.