Bladder Coating Agent Omeis DK2008

|Function|

Semi-permanent bladder coating for TBR production.

|Technical Data|

• Composition: water-based emulsion of reactive silicones

• Appearance: white liquid

• PH: 5.0~8.0

|Description|

The product is a water-based,semi-permanent bladder coating that does not contain any inflammable solvents, and it provides a lubricating barrier between the tire and the bladder. it is applied regularly according to tire type and plant size. The produc has a high percentage of active ingredients and creates few residues in the side plate. The product forms a film quickly and provides better protection to the bladder.

|Use|

The product can either be applied by a spraying process with airless or air atomizing systems or by brush and sponge. Shaking before use is necessary. The bladder should be cleaned prior to applying the product.

|Dosage|

Spray every 8 hours. Frequency of application can be increased as the bladder's service life approaches.

|Packing|

50kg/ plastic drum

|Storage stability|

Recommended storage temperature: 2-45℃

In original closed containers under cool and dry conditions 6 months from date of production.Avoid freezing.

|Safety and Transport|

Omeis DK2008 is not classified as dangerous for transport according to transport regulations. Proper use of this product will not cause any harm.

|Special declaration|

Our technical information is given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. lt does not release you from the obligation to test the products supplied by us as to their suitability for the intended processes and uses.